Product Introduction

The UT3510 series DC resistance tester includes two models, UT3513 and UT3516, and the measuring resistance ranges are 20 kΩ and 2MΩ respectively. The instrument has a large 4.3-inch LCD display with high precision, high resolution and high-speed measurement characteristics. It has an accuracy of 0.05%, a minimum resolution of 1μΩ and a measurement speed of 60 times per second. At the same time, it comes standard with USB DEVICE, RS-232C and HANDLER communication interfaces, supports SCPI and MODBUS RTU protocols, and can communicate with computers, PLCs or WINCE devices to efficiently complete remote control and data acquisition functions.

Applications

Components: resistors, inductors, transformers, motors, relays, circuit solder joints, capacitor riveting joints, cables, stranded wires, connectors, various switches.

Material: Thermal materials (fuse, sensor of electric thermistor), metal foil and other conductive materials.

New energy: electric vehicle battery pack connection bridge, electric core connection resistance.

Features

◆4.3 inch large screen LCD display

◆0.05% accuracy, with 20000 readings

◆The minimum resolution is 1μΩ, and the resistance value of each channel is displayed with 5 digits

◆UT3513 measuring range: 1μΩ-20kΩ

◆UT3516 measuring range: 1μΩ-2MΩ

◆With U disk data storage and screenshot save function

◆Dual function of manual and automatic saving of test data

◆Recording and statistical functions

◆Comparator sorting and alarm function

◆Support data storage and data browsing

◆The measurement speed can reach 60 times/second (UT3516)

◆Built-in temperature compensation interface

◆Standard RS-232C, USB DEVICE and HANDLER interface

◆Support SCPI, Modbus RTU protocol

◆Suitable for standard half 2U cabinet